Centrifuge Features

The US Filtermaxx Centrifuge is easy to use!

  • Downloadable Users Manual
  • Fully designed, manufactured, assembled and tested in USA.
  • 2400, 2750, and 3000 g-force models available.
  • ¾ to 1.5 hp industrial electric motor.
  • Single phase 120V or 240V, or 3 phase 240V/460V pre-wired motors available.
  • Does not require electronic frequency converter to get high rotor speeds.
  • Does not require a specially insulated motor.
  • Belt overdrive system drives the high-speed rotor while the motor runs at 1800 rpm for a quieter, cooler running, longer lasting centrifuge.
  • Large 1 gallon bowl that filters up to 1000 gallons of oil per day.
  • Input ¼ inch NPT. Output ¾ NPT or 1¼ inch NPT optional
  • Operating load is taken by 1-inch diameter spindle with replaceable bearings, not the motor bearings as with some other centrifuges.
  • Bowl is removed by the quick release spindle in less than a minute.
  • Sand cast, heavy duty 1 inch thick aluminum centrifuge body.
  • Rotor is machined aircraft grade aluminum casting.
  • Machine weight 106 to 126 pounds, depending upon model.
  • 15 minutes from box to operation.
  • Automatic controller (optional) allows unit to cycle and drain sludge for unattended cleaning of up to 1000 gallons of oil per day!
  • Free shipping to the lower 48 states!

The power of a centrifuge is seen in dryness of the cake. A more powerful centrifuge will give a harder dry cake against the wall. A soft, soupy cake is found in lower power centrifuge.

Below, hard particulates removed during hydraulic oil cleaning:

Random Testimony:

Steve,

I run WVO through 2 of your centrifuges at 50 gallons per hour and sell that as base for a degreaser. The third centrifuge runs WVO at 25 gallons per hour and I sell it for biodiesel. The oil temperature leaving the centrifuges is 150 degrees and they all work great!

Thanks,
Jason